Wilbur’s Finest Bookbinding Products Buyer's Guide

Looking for several bookbinding tools in one store? 

You’re in the right place! 

 

Wilbur’s Finest carries three (3) awesome tools that will help your bookbinding projects. Check out the products we have that you might be looking for:

 

 

•  Signature Punching Tool
  •  9inch
  •  9 inch - 2 color
  •  12 inch Imperial
  •  12 inch - 2 color
  •  225mm Metric
  •  225mm - 2 color

 

 

 

•  Bookbinding T-spacers
  •  10 cm
  •  20 cm
  •  30 cm

 

 

 

•  Bookbinding Corner Cutting Jig Set
  •  1.5, 2, 2.25, 2.5, 2.75, 3
  •  4, 5, 6, 12
  •  Full Set

 

 

These tools are perfect for beginners in bookbinding as the primary purpose of these tools is to guide the user and get the job done accurately with ease. 

 

To tell it to you straight, these products offer convenience, quality material, and a wide range of size and preference options. Plus, they’re easy to use and allow you to finish your job in a snap.

 

Check out their features and user-benefits!

 

The Signature Punching Tool is here to help prepare all of the signatures of a book you’re working on in precise measurements. With the cradle’s help, the holes for sewing will be spaced apart evenly and aligned with the ones on the opposite side of the sheet.

 

 

 

 

 

We’ve got two sizes available: the 9-inch and the 12-inch punching tools. You can also choose between two measurement systems: the imperial and metric variation.

 

Our metric awl guides are 225mm long and have demarcations for 5mm, 10mm, and 15mm holes. On the other hand, our imperial awl guide is 9-inches long and has demarcations for ¼” and ½” holes. The measurements in the guide are numbered for easy identification

 

If you see something you like, visit the links here to shop:

 

•  Signature Punching Tool (9 Inch)
•  Signature Punching Tool (9 Inch - 2 color)
•  Signature Punching Tool (12 Inch Imperial)
•  Signature Punching Tool (12 Inch - 2 color)
•  Signature Punching Tool (225 Metric)
•  Signature Punching Tool (225 - 2 color)

 

 

Spacers are tools that measure the hinge width of a book when you are making the book cover. Our spacers are 2.5mm tall and we have different lengths available: 10cm, 20cm, and 30cm. The set includes 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, and 30mm.

 

 

 

 

 

Visit the links below to shop:

 

•  Bookbinding T Spacers 10cm
•  Bookbinding T Spacers 20cm
•  Bookbinding T Spacers 30cm

 

 

As the name suggests, corner cutters are small tools that help you cut corners of a book cover. Cutting the corners allows you to cover a book easily without the bulk of the paper in the way. They’re very easy to use, convenient, and make bookbinding faster!

 

 

 

 

All you have to do is place the tool on the corners, and slide your blade or scissors against the line to cut. Then, you’ll have clean and perfectly angled edges. 

 

Our bookbinding corner cutting jig set is includes the following sets:

 

•  Corner Cutter Jig Set - 1.5, 2, 2.25, 2.5, 2.75, 3
•  Corner Cutter Jig Set - 4, 5, 6, 12
•  Corner Cutter Jig Set - Full Set

 

 

There’s nothing better than binding some books quickly and efficiently. Thanks to well-designed tools like these, it’s such a breeze finishing up something that usually would require more time and effort. 

 

So, are you ready to shop and check out?